Section Rolling Angles

Curved steel pedestrian bridge with mesh safety fencing and structural steel arches over a busy roadway.

Rolled Steel Angles (RSA), also known as angle iron, are widely used in construction and fabrication. Their versatility comes from the ability to roll the toe in or out, making them ideal for applications such as stiffening bands, lintels, and flanges.

For more complex projects, Rollco can also roll angles in a double toe configuration (diamond shape), leveraging our experience and precision to deliver solutions that meet even the most demanding specifications.

DOWNLOAD CAPACITY INFORMATION

ANGLES	TOE OUT		TOE IN
* Available rolled double toe in or out like a diamond. * 150x90x8 - 90 toe in radius, 1525 inside * 150x90x8 - 90 toe out radius, 832 inside * 150x90x8 - 150 toe in radius, 3000 inside * 150x90x8 - 150 toe out radius, 1000 inside * 150x90x12 - 150 toe in radius, 1000 inside
Section	Min. Radii	Lead In/Out	Min. Radii	Lead In/Out
25x25x3	150	200	300	200
50x50x6	250	300	350	300
75x75x6	450	400	500	350
100x100x6	1000	700	1500	700
100x100x10	450	700	650	700
125x125x6	1400	700	2000	700
125x125x12	700	700	900	700
150x150x12	900	750	1500	750
150x150x20	900	750	1000	750
200x200x13	3500	750	4500	750
200x200x20	2500	750	4000	750

The table is intended as a guide only. All customers are encouraged to seek an engineer’s advice on the suitability for specific applications. Tighter radius bends are achievable but excessive deformation or ovality may occur. Individual specifications should be quoted when enquiring.

Section Rolling Angles

The table is intended as a guide only. All customers are encouraged to seek an engineer’s advice on the suitability for specific applications. Tighter radius bends are achievable but excessive deformation or ovality may occur. Individual specifications should be quoted when enquiring.

Get In Touch For Quality Steel Solutions